You are here: Home Products By Brands MADGETECH-USA

Madgetech

Sub Categories

Accessories

Browse

Data Loggers

Browse
  • Filter
  • Search
  Name SKU Description Category
cable2070
Cable2070 CO2 monitor to data logger interface cable To connect 7001-C02 monitor to MadgeTech Voltage data loggers, this cable is required. Interface Cables
btif1000-blutooth-data-logger-interface
BTIF1000 Blutooth Data Logger Interface The BTIF1000* is a data logger accessory which adds Bluetooth® wireless capabilities to the PRTemp1000, PRTrans1000, Temp1000, RHTemp1000, Temp1000P, Temp1000S and Temp1000FP data loggers. The BTIF1000 is designed to replace the IFC110 or IFC200 with a high-speed secure wireless link. This enables wireless in-the-field downloading using MadgeTechs new Pocket PC software. It is fully Bluetooth® qualified and has a modular FCC approval (contains FCC IDQOQWT12). The BTIF1000 is equipped with... Interface Cables
ct-h608
CT-H608 Split core current relay switch, monitors 1.25-50Amps, adjustable set point between 1.25-50Amps, status LED's. Current Switches/Transducers
ct-h600
CT-H600 Split core current relay switch, monitors 0.15 to 200Amps, fixed setpoints at 0.15Amps max, no status LED's. Current Switches/Transducers
ct-h10f
CT-H10F Split core current switch, monitors 3.5-100Amps, adjustable set point between 3.5-100Amps, auto calibration, and status LED's. Current Switches/Transducers
ct-815
CT-815 Split core current switch, monitors 1.5-150Amps. Adjustable set point and status LED's. Current Switches/Transducers
ct-805
CT-805 Split Core current switch, monitors 1.5-250Amps, sensor trips at 1.5Amps. Switch can be used for both AC and DC circuits. Current Switches/Transducers
ct-800
CT-800 Solid core current switch, monitors 1-250Amps, sensor trips at 1Amp. Switch can be used for both AC and DC circuits. Current Switches/Transducers
waterbox110c
Waterbox110C The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and... Enclosures
waterbox101a
Waterbox101A The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use,... Enclosures
thermovault140.1
ThermoVault140 The ThermoVault140 is an extreme high temperature data logging system, for use with a HiTemp140 data logger and stainless steel thermal barrier enclosure. This durable system can withstand temperatures up to 250°C when completely submerged and 350°C in dry heat applications (O-ring removed). The ThermoVault140 is built for use in harsh applications that require extreme temperature monitoring, such as with furnace profiling, geothermal down-hole recording, and oven data logging. The... Enclosures
thermovault1000
ThermoVault1000 The ThermoVault1000 is a stainless steel thermal barrier for use with the Temp1000P or Temp1000FP data loggers. This durable enclosure is submersible and can withstand temperatures of up to 350°C (230°C with O-Ring). This device is easy to install. Simply open the enclosure, insert the data logger, thread the probe through the end cap and latch it back onto the barrier body. The ThermoVault1000 is built for use in applications that require extreme temperature monitoring, such as with... Enclosures
hitemp150-ts
HiTemp150-TS The HiTemp150-TS is a thermal shield enclosure for use with the HiTemp150 and HiTemp150-PT data loggers. This durable enclosure can withstand temperature up to 250°C. The device is easy to use. Simply open the enclosure, insert the HiTemp150 or HiTemp150-PT, thread the probe through the end cap and latch it back onto the barrier body. The HiTemp150-TS is built for use in applications that require extreme temperature monitoring, such as peanut roasting and food processing. Enclosures
hitemp140-ts
HiTemp140-TS Thermal shield for the HiTemp140 data logger. Available with a vented top or flush top. The HiTemp140-TS is a thermal shield designed for use with the HiTemp140 data logger. This durable enclosure allows the data logger to be used in temperatures from –200°C to +250°C, making it ideal for peanut roasting, food processing, autoclave validation and other extreme temperature applications. To use, simply place the HiTemp140 in the IFC400 docking station (sold separately). Use the MadgeTech... Enclosures
tj36-cass-18u-6-smpw-m
TJ36-CASS-18U-6-SMPW-M Type K Thermocouple with 6" x 1/8" dia. Stainless Steel Sheath and 3’ of lead wire. Replacement Thermocouple for ETR101A. Probes
thermocouple-probe-assembly-for-glycol-bottle
Thermocouple Probe Assembly for Glycol Bottle Thermocouple Probe Assembly for 30ml, 60ml and 250ml Glycol Bottles. Probes
tc-ku-12062003-probe-3-sheath
TC-KU-12062003 Probe (3" sheath) Type K Thermocouple assembly. 60” PFA wire with a 1/8” diameter. 3” stainless steel sheath. For CTL2000. Probes
tc-ku-12062002-probe-5-75-sheath
TC-KU-12062002 Probe (5.75" sheath) Type K Thermocouple assembly. 60” PFA wire with a 1/8” diameter. 5.75” stainless steel sheath. For CTL2000. Probes
rugged-rtd-probe
Rugged RTD Probe 100 Ohm, 4 wire RTD probe with metal strain relief wrapped. Available with a 6" or 12" sheath. Probes
rtd-probe
RTD Probe Precision 100 Ohm, 4 wire RTD probe, with a 6" or 12" sheath. Probes